Bj6103b Dual Function Bone Cannulated Drill

Specification:Output power≥90wSpeed(r.p.m) 0-630Oscillations (osc/min)/Torque(Nm)3.6Operation(V) voltage9.6Sterilization155°CSwings (°) /Noise(db)≤40Notes:1.Sterilize temperature ≤ 135 °C (Improved type ≤ 155 °C ),if the   

Featured Products

Bj6103b Dual Function Bone Cannulated Drill
Bj6103b Dual Function Bone Cannulated Drill
Bj6103b Dual Function Bone Cannulated Drill
Bj6103b Dual Function Bone Cannulated Drill
Specification:
Output power≥90w
Speed(r.p.m) 0-630
Oscillations (osc/min)/
Torque(Nm)3.6
Operation(V) voltage9.6
Sterilization155°C
Swings (°) /
Noise(db)≤40

Notes:
1.Sterilize temperature ≤ 135 °C (Improved type ≤ 155 °C ),if the 
    temperature is over 135 ° C ,the motor will be damaged.
2.Normal bone drill can only hold drill bits less than 6mm,acetabulum 
    reaming drill with big torque,rpm is around 300,canulate drill is used 
    with nail or K wire ,rpm is around 600.
3.The battery need to be get out of the pwer tool after surgery. Otherwise 
    the small automatic discharge of the electric will make the life of the 
    battery short.
4.The battery cannot be sterilized ,it is not autoclavable.
5.The cranial bur must be washed right after the surgery by purger in 
    order to aviod the blood stick in the bur,then we should make it dry.
6.The battery space in the handpiece of the tool should not have any 
    water,after sterilization.
7.The cranial bur blade is made of medical stainless steel,in order to 
    avoid broken,so it is flexible and not very hard,it is easy to be attrite, 
    we suggest each blade only use for 1 surgery.
Bj6103b Dual Function Bone Cannulated Drill
Bj6103b Dual Function Bone Cannulated Drill
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours